|
For the first time in a economical digital meter, you are able to view the actual channel on the screen of the meter. Now you can quickly and accurately align the satellite AND you can instantly check the stability of the channel right on the screen of the meter.
Transponders, Frequency, Symbol Rate, Polarity, and other settings can be modified by the user. There is never a need to send your meter in for a upgrade.
Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.
- •SM-2500 Specifications
- •System Capabilities Fully DVB compliant Yes
- •LNB/Tuner input Connector F type, female
- •Frequency Range 950MHz-2150MHz
- •Signal Level -65dBm~-25dBm
- •LNB Supply 13/18V, Max 400mA
- •LNB Switch Control 22KHz
- •DiSEqC Ver 1.0
- •Demodulator Front End QPSK
- •Symbol Rate 2Msps~45Msps
- •SCPC & MCPC Capable Yes
- •Spectral Inversion Auto Conversion
- •System Resource Processor 32 bit processor (200 MHz)
- •SDRAM 16 Mbyte
- •FLASH 2 Mbyte
- •EEPROM 8 Kbyte
- •Video Decoder MPEG 2 Main Profile @ Main Level
- •Data Rate Up to 15M bits/s
- •Resolution 720x576, 720x480
- •Video Format NTSC, PAL, SECAM
- •Aspect Ratio 4:3, 16:9
- •MPEG Audio MPEG 1 layer 1 & 2
- •Type Mono
- •Sampling rates 32,44.1 and 48 Khz
- •Serial Data Interface Connector USB type
- •Power Supply Battery 1950 mA
- •Supply Voltage 12.6 Volt
- •Charger 90~240 Volt, 50/60 Hz
- •Connectors Digital Tuner Input F type, female
- •Physical Specifications Size (3.5"Wx6"Hx1.75"D) 9.5x15.5x4.5 (cm)
- •Weight (Net) 1.1 pds 0.50 Kg
|
